EXCEPTION_ACCESS_VIOLATION

Dorjan · Post by **Dorjan** » Thu Jun 03, 2010 8:38 am

All I can say is OMG WYLD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

WB if you remember me at all that is

raumvogel · Post by **raumvogel** » Thu Jun 03, 2010 10:04 am

They always come back. Alleg is like a home that you left...but had to come back to.

WyldKarde · Post by **WyldKarde** » Thu Jun 03, 2010 1:31 pm

HSharp wrote:QUOTE (HSharp @ Jun 2 2010, 11:18 PM) EDIT: Also try disabling texture pack under graphics options, advanced, use texture pack (ESC->O->A->P) (otherwise known as ACE keypress) try post below first instead actually

---

Also you didn't crop your VideoSettings log did you?

mine looks like

(

Code: Select all

 snipped)

Which looks a bit different to yours as you don't seem to have the 2nd section, this might be part of ze problem.[/quote]

Ok, just dug out the logfile and cutanpasted it in it's entirety:

CODELog file VideoSettings.log created - Jun 02, 19:49

Created D3D9 interface.
Found 1 adapters.
Extracting adapter 0: \\.\DISPLAY1 - NVIDIA GeForce 8800 GTX
800 x 600 @ 60Hz [32 bit]		[HW 1   WND 1   DS 77   AA 0x17]
800 x 600 @ 72Hz [32 bit]		[HW 1   WND 1   DS 77   AA 0x17]
800 x 600 @ 75Hz [32 bit]		[HW 1   WND 1   DS 77   AA 0x17]
1024 x 768 @ 60Hz [32 bit]		[HW 1   WND 1   DS 77   AA 0x17]
1024 x 768 @ 70Hz [32 bit]		[HW 1   WND 1   DS 77   AA 0x17]
1024 x 768 @ 75Hz [32 bit]		[HW 1   WND 1   DS 77   AA 0x17]
1152 x 864 @ 75Hz [32 bit]		[HW 1   WND 1   DS 77   AA 0x17]
1280 x 800 @ 60Hz [32 bit]		[HW 1   WND 1   DS 77   AA 0x17]
800 x 600 @ 56Hz [32 bit]		[HW 1   WND 1   DS 77   AA 0x17]
1440 x 900 @ 59Hz [32 bit]		[HW 1   WND 1   DS 77   AA 0x17]
1440 x 900 @ 60Hz [32 bit]		[HW 1   WND 1   DS 77   AA 0x17]
1440 x 900 @ 75Hz [32 bit]		[HW 1   WND 1   DS 77   AA 0x17]
800 x 600 @ 60Hz [16 bit]		[HW 1   WND 1   DS 77   AA 0x17]
800 x 600 @ 72Hz [16 bit]		[HW 1   WND 1   DS 77   AA 0x17]
800 x 600 @ 75Hz [16 bit]		[HW 1   WND 1   DS 77   AA 0x17]
1024 x 768 @ 60Hz [16 bit]		[HW 1   WND 1   DS 77   AA 0x17]
1024 x 768 @ 70Hz [16 bit]		[HW 1   WND 1   DS 77   AA 0x17]
1024 x 768 @ 75Hz [16 bit]		[HW 1   WND 1   DS 77   AA 0x17]
1152 x 864 @ 75Hz [16 bit]		[HW 1   WND 1   DS 77   AA 0x17]
1280 x 800 @ 60Hz [16 bit]		[HW 1   WND 1   DS 77   AA 0x17]
800 x 600 @ 56Hz [16 bit]		[HW 1   WND 1   DS 77   AA 0x17]
1440 x 900 @ 59Hz [16 bit]		[HW 1   WND 1   DS 77   AA 0x17]
1440 x 900 @ 60Hz [16 bit]		[HW 1   WND 1   DS 77   AA 0x17]
1440 x 900 @ 75Hz [16 bit]		[HW 1   WND 1   DS 77   AA 0x17]


FOUND RESOLUTIONS (MODE 0) (MAXRATE: 60):
	0) 800x600 @ 60
	1) 1024x768 @ 60
	2) 1152x864 @ 75
	3) 1280x800 @ 60
	4) 1440x900 @ 60
CURRENT IN-GAME RESOLUTION: 1440x900 @ 60

User selected values:
AD 0   MON 0x00010001   WIN 0   VSYNC 0
Fullscreen settings:
FMT 22   W 800   H 600   RR 60   DEP 77
Windowed settings:
FMT 22   W 800   H 600   RR 60   DEP 77
FSMS 2   WINMS 2
MIN 3   MAG 2   MIP 2
Window offset: 0  0

Log closed.


That's since I tried the tutorial under beta tho', so no idea how that interacts with R5.

As for the registry entries, combatfullscreenxsize is 1280, combatfullscreenysize is 1024.

1280x1024?  Strange screen resolution.

Also, Dorj, Raum, great to hear from you guys, but can we not do the hugs and reunion thing in the middle of a tech support thread please?  It kinda gets in the way of my actually getting ingame.  I'll try and save some prox for you both once I'm up and flying again.  :)

notjarvis · Post by **notjarvis** » Thu Jun 03, 2010 1:54 pm

Wyld : Sai has put the Beta lobby back up, so if you could try the Beta in-game please (just to check this is fixed with R6). That would be grand

HSharp · Post by **HSharp** » Thu Jun 03, 2010 2:32 pm

WyldKarde wrote:QUOTE (WyldKarde @ Jun 3 2010, 02:31 PM) As for the registry entries, combatfullscreenxsize is 1280, combatfullscreenysize is 1024.

1280x1024? Strange screen resolution.

1280x1024 does indeed sound weird, try changing it to 1024 x 768 on regedit (rightclick on CombatFullScreenXSize and select modify, and press decimal and change it to 1024, and it's 400x300 in Hexadecimal terms)
then try up Allegiance (non Beta) and see if that works.

And if your still getting the error can you also tell me what happens if you run Allegiance directly without ASGS to play the training missions?

WyldKarde · Post by **WyldKarde** » Thu Jun 03, 2010 4:26 pm

Ok, I can connect to the beta lobby just fine now, so that's that sorted. Looks like if we fail here I should be ok when R6 goes live.

Just made the recommended registry changes. Gonna go try now and will edit this post when I have a result.

Edit:

It works! Logged into the main game, set myself up a custom singleplayer round, launched, loaded and undocked just fine. I'm back, baby!

Thanks for the assist, everyone. Especially to HSharp who finally found the glitch. Dunno how the heck that weird@#(! resolution setting ended up in my registry, but now it's fixed and I'm feeling fine.

See you out in the black, amigos!

ogorass · Post by **ogorass** » Thu Jun 03, 2010 4:35 pm

WyldKarde wrote:QUOTE (WyldKarde @ Jun 2 2010, 11:21 PM) RAM: 3070MB (Odd, I thought this was a 4 gig box...)

Just chipping in on this little part: You need a 64 bit version of Windows to use anything above 3GB of RAM. You can actually have more physical memory installed, and you probably have, the limitation is because of the maximum address space of a 32 bit OS is, well, 4GB. The 1 GB missing is a sideeffect caused by the fact, that RAM is not the only thing that needs addresses. So yeah, if you want to use the full capacity of your physical memory, upgrade to x64 OS.

OK. Carry on gentlemen.

HSharp · Post by **HSharp** » Thu Jun 03, 2010 4:42 pm

No problem, thanks should go to SR-71 though who noticed the problem when Vly was in a similar situation.

It's quite odd though of how your ingame resolution changed, normally you can only change it in fullscreen mode and I thought the default was 800 x 600.

ogorass · Post by **ogorass** » Thu Jun 03, 2010 5:57 pm

HSharp wrote:QUOTE (HSharp @ Jun 3 2010, 06:42 PM) No problem, thanks should go to SR-71 though who noticed the problem when Vly was in a similar situation.

It's quite odd though of how your ingame resolution changed, normally you can only change it in fullscreen mode and I thought the default was 800 x 600.

It can also be changed, if you launch with "Safe Mode" option selected in ASGS. It then displays gfx settings window prior to launching Allegiance.exe.

WyldKarde · Post by **WyldKarde** » Thu Jun 03, 2010 6:48 pm

ogorass wrote:QUOTE (ogorass @ Jun 3 2010, 06:57 PM) It can also be changed, if you launch with "Safe Mode" option selected in ASGS. It then displays gfx settings window prior to launching Allegiance.exe.

Except for some reason that didn't work for me.

Edit: To clarify, running in Safe Mode brought up the gfx dialogue, but I still faced crashes when joining a game in fullscreen, or joining windowed then going to fullscreen.