Nat Again

DasSmiter · Post by **DasSmiter** » Mon Jul 03, 2006 11:30 pm

in the old thread it was mentioned that there were ways to make the client connect without any forwarding or anything, is this code based only ( so it has to be coded into the client in the next update ) or is it a process i can do myself?

if i can't do it myself then simply forwarding the ports should allow me to connect without turning off the NAT option or just plugging directly into the modem right?

beauty · Post by **beauty** » Mon Jul 03, 2006 11:46 pm

It is not possible with the current code to connect without forwarding. (Unless you are 'directly' connected to the internet.)

Under later versions of DirectX there are calls so that the Client can initiate the connection to the server. The original code doesn't support it and the developers will need to make some not minor changes to get it to work.

Grimmwolf_GB · Post by **Grimmwolf_GB** » Tue Jul 04, 2006 7:08 am

On normal routers, you have two options:
1) Port triggering
2) Port forwarding

When you do not have access to your router, you can connect to a network via VPN, where you get your ports forwarded (or triggered).

DasSmiter · Post by **DasSmiter** » Tue Jul 04, 2006 3:31 pm

so simply triggering porst 2300-2400 should allow me to play?

Grimmwolf_GB · Post by **Grimmwolf_GB** » Tue Jul 04, 2006 4:46 pm

If you use 47624 TCP as trigger for 2300-2400 TCP/UDP, then yes.

DasSmiter · Post by **DasSmiter** » Wed Jul 05, 2006 3:32 pm

so its 47624 tcp outbound and 2300-2400 tcp/udp inbound correct?

Grimmwolf_GB · Post by **Grimmwolf_GB** » Wed Jul 05, 2006 4:54 pm

ASSASSINO · Post by **ASSASSINO** » Wed Jul 05, 2006 5:02 pm

i just did that and cant connect

ASSASSINO · Post by **ASSASSINO** » Wed Jul 05, 2006 5:10 pm

i give up by my self i can´t put this game online

Grimmwolf_GB · Post by **Grimmwolf_GB** » Wed Jul 05, 2006 5:31 pm

Read the read me and post in your own thread please.