can't connect to lobby "guaranted message couldn't be delivred

azarathFR · Post by **azarathFR** » Tue Aug 01, 2006 12:33 pm

hi i can't connect to lobby i have setup 2300-2400 port ans i hav this message "cannot connect to lobby reason : guaranted message couldn't be delivred" its because the port hav wrong setup ?

sorry i dont speak english very well im french /mrgreen.gif" style="vertical-align:middle" emoid=":D" border="0" alt="mrgreen.gif" /> if you can speak french..

thanks for your help

Grimmwolf_GB · Post by **Grimmwolf_GB** » Tue Aug 01, 2006 2:37 pm

It means, that you have forwarded 2300-2400 TCP but forgot to forward 2300-2400 UDP. (This error message can be found in the knowledge base... /wink.gif" style="vertical-align:middle" emoid=";)" border="0" alt="wink.gif" /> )

azarathFR · Post by **azarathFR** » Tue Aug 01, 2006 6:06 pm

i have fowarded 2300 2400 this and udp i dont have forgot

azarathFR · Post by **azarathFR** » Tue Aug 01, 2006 6:24 pm

i do this ...

____________aplication________trigger____________________open
_____________ name____protocol port_range__________protocol__port_range
_______________________________start_end________________start_end
_____________allegiance___TCP____2300_2400_________UDP__2300_2400

but i have the same message :/ this game looks like very good i want to play at this game
please help meee :'(

Grimmwolf_GB · Post by **Grimmwolf_GB** » Tue Aug 01, 2006 6:39 pm

Your forwarding rule is wrong, because you are in the port triggering section. /mrgreen.gif" style="vertical-align:middle" emoid=":D" border="0" alt="mrgreen.gif" />

Use 47624 TCP as trigger and in the open section use 2300-2400 TCP/UDP
If your router does not let you open both protocols at once, write two trigger rules, one with UDP and one with TCP.

GreyVulpine · Post by **GreyVulpine** » Tue Aug 01, 2006 6:40 pm

azarathFR wrote:QUOTE (azarathFR @ Aug 1 2006, 02:24 PM) i do this ...
____________aplication________trigger____________________open
_____________ name____protocol port_range__________protocol__port_range
_______________________________start_end________________start_end
_____________allegiance___TCP____2300_2400_________UDP__2300_2400

but i have the same message :/ this game looks like very good i want to play at this game
please help meee :'(

Aah.. okay. You're doing port triggering. Delete that rule you made.

You'll do 2 rules.

Allegiance TCP 47624 47624 TCP 2300 2400
Allegiance UDP 47624 47624 UDP 2300 2400

Try it, and get back to us.
-GreyVulpine

azarathFR · Post by **azarathFR** » Wed Aug 02, 2006 12:09 pm

looool thanks but now the message is failed to connect to lobby

i want to play this game i have setup the triggering rule 47624 TCP/UDP and port 2300-2400 TCP/UDP

the message as change now its failed to connect to lobby

Grimmwolf_GB · Post by **Grimmwolf_GB** » Wed Aug 02, 2006 1:01 pm

Please use

47624 TCP Trigger for
2300-2400 TCP/UDP

NOT 47624 tcp/udp
2300-2400 TCP/UDP

azarathFR · Post by **azarathFR** » Wed Aug 02, 2006 2:07 pm

ok i do now

azarathFR · Post by **azarathFR** » Wed Aug 02, 2006 2:10 pm

i did 47624 tcp and 2300-2400 tcp/udp but..... its the same message