Failed to connect to lobby (Split from Cant connect into server)

ASSASSINO · Post by **ASSASSINO** » Wed Jul 05, 2006 4:10 pm

Damm i tried changing like you guys said but i still cant connect to server list.

My modem router is HUAWEI MT882

http://www.portforward.com/english/routers...routerindex.htm

Can you please see in this page and explain me how to do it?

offcourse i dont know mutch in computer internet options.

I tried in virtual server option in private port : 47624
public port : 47624

ImmortalZ · Post by **ImmortalZ** » Wed Jul 05, 2006 5:59 pm

ASSASSINO wrote:QUOTE (ASSASSINO @ Jul 5 2006, 09:10 PM) Damm i tried changing like you guys said but i still cant connect to server list.

My modem router is HUAWEI MT882

http://www.portforward.com/english/routers...routerindex.htm

Can you please see in this page and explain me how to do it?

offcourse i dont know mutch in computer internet options.

I tried in virtual server option in private port : 47624
public port : 47624

I have a Huawi SmartAX MT-881. I use it in bridge mode, but nevertheless, I know how to add port forwarding to it (it even comes with a preset MSN Gaming Zone setting). But I need to see the 882s screens to guide since it is a much more complicated device with a wireless AP built in. Post some screenies and I'll guide you through it.

ASSASSINO · Post by **ASSASSINO** » Wed Jul 05, 2006 9:38 pm

I thank your help, here are some pics:

Advanced virtual server:

Advanced Aplications

If you need any pic please ask, i already allowed windows firewall to allegiance.exe

Post by **Tigereye** » Wed Jul 05, 2006 9:43 pm

Your "Applications" settings look perfect. Can you get in?
If not, did you also add a virtual server?

You should use only one type of setting at a time. Your Applications settings are good, so remove any Virtual Server settings you added for Allegiance.

If you can't get in still, then switch the settings: Remove the application, and add a virtual server. Add two: 2300 and 2301 (both TCP/UDP) and forward them to your computer's IP address. Check the knowledgebase for an article on finding your computer's IP address.

Grab Dxport (check the knowledgebase) and use that to force Allegiance onto 2300-2301. That should work.

--TE

Grimmwolf_GB · Post by **Grimmwolf_GB** » Wed Jul 05, 2006 10:03 pm

I split and cleaned the thread.

ASSASSINO, so far so good. Your settings look fine. Before you start adding virtual server settings, try to find a uPnP setting and change its setting. If it is on, turn it off. If it is off, turn it on. Try to connect again.

ASSASSINO · Post by **ASSASSINO** » Wed Jul 05, 2006 10:15 pm

Cant find Dxport

I can give my msn i think it would be faster to end the problem
I did that with the ip 40 in the end

ASSASSINO · Post by **ASSASSINO** » Wed Jul 05, 2006 10:23 pm

I downloaded dxport and make like you sai still cant acess lobby.

Cant find upnp

ImmortalZ · Post by **ImmortalZ** » Thu Jul 06, 2006 8:33 am

ASSASSINO, don't enable anything other than what you do in applications.

If you scroll down on that page, you'll see a bunch of preset settings for apps. Select MSN Gaming Zone (or Age of Empires, the name changes depending on firmware revision) and enable it. You don't have to enter anything else. Be sure you hit apply after any changes and let the router reboot. It won't apply the settings unless you wait for the router to reboot and let the settings page reappear.

ASSASSINO · Post by **ASSASSINO** » Fri Jul 07, 2006 11:49 am

It works now, the problem was the windows firewall, i add to add ports in the settings after openning port with that program.

Grimmwolf_GB · Post by **Grimmwolf_GB** » Fri Jul 07, 2006 12:17 pm

I am glad you are finally able to play the game, enjoy it. /smile.gif" style="vertical-align:middle" emoid=":)" border="0" alt="smile.gif" />