Page 1 of 2
Posted: Mon Jul 03, 2006 11:30 pm
by DasSmiter
in the old thread it was mentioned that there were ways to make the client connect without any forwarding or anything, is this code based only ( so it has to be coded into the client in the next update ) or is it a process i can do myself?
if i can't do it myself then simply forwarding the ports should allow me to connect without turning off the NAT option or just plugging directly into the modem right?
Posted: Mon Jul 03, 2006 11:46 pm
by beauty
It is not possible with the current code to connect without forwarding. (Unless you are 'directly' connected to the internet.)
Under later versions of DirectX there are calls so that the Client can initiate the connection to the server. The original code doesn't support it and the developers will need to make some not minor changes to get it to work.
Posted: Tue Jul 04, 2006 7:08 am
by Grimmwolf_GB
On normal routers, you have two options:
1) Port triggering
2) Port forwarding
When you do not have access to your router, you can connect to a network via VPN, where you get your ports forwarded (or triggered).
Posted: Tue Jul 04, 2006 3:31 pm
by DasSmiter
so simply triggering porst 2300-2400 should allow me to play?
Posted: Tue Jul 04, 2006 4:46 pm
by Grimmwolf_GB
If you use 47624 TCP as trigger for 2300-2400 TCP/UDP, then yes.
Posted: Wed Jul 05, 2006 3:32 pm
by DasSmiter
so its 47624 tcp outbound and 2300-2400 tcp/udp inbound correct?
Posted: Wed Jul 05, 2006 4:54 pm
by Grimmwolf_GB
Yep.
Posted: Wed Jul 05, 2006 5:02 pm
by ASSASSINO
i just did that and cant connect
Posted: Wed Jul 05, 2006 5:10 pm
by ASSASSINO
i give up by my self i can´t put this game online
Posted: Wed Jul 05, 2006 5:31 pm
by Grimmwolf_GB
Read the read me and post in your own thread please.