Page 3 of 3
Posted: Wed Nov 25, 2009 7:06 pm
by Sharpshooter
Neither works. I opened the files, and there was an option on my Zip opener to install. Neither worked, I'll try another program to unzip.
Edit:
I used the other Zip file opener and was able to install it. Will restart computer and tell results

Posted: Wed Nov 25, 2009 10:46 pm
by Sharpshooter
Sharpshooter wrote:QUOTE (Sharpshooter @ Nov 25 2009, 02:06 PM) Neither works. I opened the files, and there was an option on my Zip opener to install. Neither worked, I'll try another program to unzip.
Edit:
I used the other Zip file opener and was able to install it. Will restart computer and tell results
Didn't work.
Should I have launched on safemode uninstall reinstall?
Posted: Wed Nov 25, 2009 11:20 pm
by Wasp
Did the video drivers install properly?
If they did, then we're on to the next step.
What exactly "didn't work"?
Posted: Thu Nov 26, 2009 1:02 pm
by Sharpshooter
Wasp wrote:QUOTE (Wasp @ Nov 25 2009, 06:20 PM) Did the video drivers install properly?
If they did, then we're on to the next step.
What exactly "didn't work"?
Yes driver installed properly.
When I launched Allegiance, it black screened and closed (again)
Back at step 1

Posted: Thu Nov 26, 2009 1:21 pm
by Wasp
We got your drivers updated and you've done all you can on your end.
Now post your VideoSettings.log and DeviceCreation.log in a CODEBOX for the Devs, they'll take it from here.
Posted: Sat Nov 28, 2009 3:02 pm
by Sharpshooter
Wasp wrote:QUOTE (Wasp @ Nov 26 2009, 08:21 AM) We got your drivers updated and you've done all you can on your end.
Now post your VideoSettings.log and DeviceCreation.log in a CODEBOX for the Devs, they'll take it from here.
Edit:
DeviceCreation:
Code: Select all
Log file DeviceCreation.log created - Nov 28, 10:04
CD3DDevice9 initialised.
Direct3DCreate9 succeeded.
Pure HWVP device creation failed: 0x8876086c.
HWVP device creation failed: 0x8876086c.
SWVP device created.
Device supports A1R5G5B5 format.
Device creation finished.
Log closed.
VideoSettings:
Code: Select all
Log file VideoSettings.log created - Nov 28, 10:04
Created D3D9 interface.
Found 1 adapters.
Extracting adapter 0: \\.\DISPLAY1 - VIA/S3G KM400/KN400
800 x 600 @ 60Hz [32 bit] [HW 1 WND 1 DS 80 AA 0x01]
800 x 600 @ 75Hz [32 bit] [HW 1 WND 1 DS 80 AA 0x01]
800 x 600 @ 85Hz [32 bit] [HW 1 WND 1 DS 80 AA 0x01]
800 x 600 @ 100Hz [32 bit] [HW 1 WND 1 DS 80 AA 0x01]
1024 x 768 @ 60Hz [32 bit] [HW 1 WND 1 DS 80 AA 0x01]
1024 x 768 @ 75Hz [32 bit] [HW 1 WND 1 DS 80 AA 0x01]
1024 x 768 @ 85Hz [32 bit] [HW 1 WND 1 DS 80 AA 0x01]
1280 x 1024 @ 60Hz [32 bit] [HW 1 WND 1 DS 80 AA 0x01]
800 x 600 @ 60Hz [16 bit] [HW 1 WND 1 DS 80 AA 0x01]
800 x 600 @ 75Hz [16 bit] [HW 1 WND 1 DS 80 AA 0x01]
800 x 600 @ 85Hz [16 bit] [HW 1 WND 1 DS 80 AA 0x01]
800 x 600 @ 100Hz [16 bit] [HW 1 WND 1 DS 80 AA 0x01]
1024 x 768 @ 60Hz [16 bit] [HW 1 WND 1 DS 80 AA 0x01]
1024 x 768 @ 75Hz [16 bit] [HW 1 WND 1 DS 80 AA 0x01]
1024 x 768 @ 85Hz [16 bit] [HW 1 WND 1 DS 80 AA 0x01]
1280 x 1024 @ 60Hz [16 bit] [HW 1 WND 1 DS 80 AA 0x01]
Reading previous user selected values from registry:
Device index 0: VIA/S3G KM400/KN400 [\\.\DISPLAY1]
Mode index 1: 800 x 600 @ 75Hz [32 bit]
WIN: 1 VSYNC: 1
AA 0: No antialiasing
MAG: 3 MIN: 3 MIP: 2
MTS: 1 AGMIP: 0 PACK: 1
User selected values:
AD 0 MON 0x00010001 WIN 1 VSYNC 1
Fullscreen settings:
FMT 22 W 800 H 600 RR 75 DEP 80
Windowed settings:
FMT 22 W 800 H 600 RR 75 DEP 80
FSMS 0 WINMS 0
MIN 3 MAG 3 MIP 2
Window offset: 0 0
Log closed.
Posted: Mon Nov 30, 2009 10:33 pm
by Sharpshooter
Could this new version of allegiance fix the problem?
Posted: Mon Nov 30, 2009 10:35 pm
by notjarvis
Sharpshooter wrote:QUOTE (Sharpshooter @ Nov 30 2009, 10:33 PM) Could this new version of allegiance fix the problem?
What new version? The installer TE posted about?
No - that is the same Alleg. as was passed down to you through autoupdate. The only difference is it is wrapped in an installer.